F1NISH coatings are designed to protect a wide range of vehicles and equipment, including:

Automobiles & Trucks

Boats & Watercraft

Aircraft & Planes

Off-Road Vehicles

ATVs & UTVs

From daily drivers to extreme-use machines, F1NISH provides durable protection and a slick, high-performance finish across multiple environments.

Installation Guide

Prepare surface

After paint correction clean surface with a panel prep or alcohol to remove oils and waxes from pores of surface.

Apply the Coating

Apply Race Coat evenly to the surface using a suede applicator, working one section at a time. Crosshatching to provide even coverage

Flash Time

Allow the coating to flash for 2–12 minutes.

Flash time may vary depending on temperature and humidity.

Leveling

Level the coating with a clean, soft microfiber towel.

Leveling should be extremely easy.

If the coating smears or feels grabby, it was leveled too soon—allow additional time and level again.

Plastics & Rubber

On plastic and rubber surfaces, apply the coating and level off after approximately 1 minute.

Curing & Aftercare

The coating is ready for light use after 3 hours.

Avoid full water contact for 24 hours (no rain, washing, or rinsing) to ensure proper curing.

One 60 ml bottle of F1nish Race Coat will protect up to 2–3 small sedans or 1 large SUV, depending on vehicle size and application thickness.

If you are coating a larger vehicle, we recommend using our Fill Up Kit to ensure you have adequate product to complete your project with full, even coverage.

Troubleshooting

If the coating is left on the surface too long and streaking or hazing appears that will not come off during normal leveling:

Lightly spray a panel prep or alcohol-based solution onto a clean microfiber towel.

Gently wipe the affected area to remove any remaining dried solvents.

This will not remove the coating—approximately 90% of the product has already embedded into the surface, and performance will not be compromised.

Unopened Bottle:

When stored in a cool, dark place, Race Coat will remain stable and effective for up to 1 year.

After Opening:

Once opened, the remaining product is usable for an additional 6 months, provided the bottle is properly sealed between uses and stored in a cool, dark environment.

Storage Tips:

Keep the cap tightly closed when not in use. Avoid prolonged exposure to heat, direct sunlight, or freezing temperatures.